Edition Case

Build a Computer Editing Video

The last process  in the production of  video  is Editing, editing computer must have a special specification.The following is a brief overview how we will build a Computer Non-Linear Editing (NLE)

Install the processor on the motherboard. The processor is facing a heavy processing load, the faster the processor, the better. The motherboard has the processor. In addition, the motherboard uses its own chipset to help process information. The better / faster the chip, the better the performance.

Installing RAM on the motherboard. The memory would not be far from the processor. NLE consume lots of memory during execution and processing (“Rendering” is named) video. After RAM helps to make as much as possible and offer faster video performance smooth. While the RAM is limited, an operating system 32-bit (as some versions of Windows XP and Vista) to 3 GB of RAM makes sense, then you have an operating system 64-bit to maximize the amount of memory used.

Install the graphics card in a PCI-X slots open on the motherboard, case and screw on the back of the case. The graphics card is important because it gives an accurate indication of the edited video. In addition, a graphics card with dedicated memory and the processor is important because it make the video and graphics faster, without additional charge to help the system processor.

Insert the disk in the housing and fix the case for both points of each side of the disc. It is recommended that a hard disk should contain only the operating system and programs. The rest of the disk drive would be left for storage. Digital video takes a lot of storage space. The discs should look min at 7200 rpm and a SCSI or SATA. Another possibility is the solid state drive (SSD) that use much faster than normal hard disk, but in March 2010

Insert the disc into the player’s case. The player can be pushed forward by the housing and bolted to the sides of the disk drives in the same drive. How to install the hard drive depends on the needs of the publisher. If the publisher has changed to the final export to or , these units can be installed on your computer.

Install the power supply into the case so that the plug on the back of the case. Power must be strong enough to power all system components and must be at least 500W.

Install the heatsink / fan on the motherboard. The fan / heatsink that is included with the processor may or may not be sufficient to cool the processor. While the processor works, it heats, which in the long term, could damage the CPU and the case does not work. Some processors are “hot” is known, you can add a heatsink / fan, by another manufacturer.

Install the motherboard into the case by screws, in this case, the screw holes on the edge of the motherboard and one in the middle of the motherboard. The case should be large enough to hold the motherboard, but also provide enough ventilation to cool the system.

For more Articles,visit to : www.videomaker79.com

About the Author

I am a video maker, wants to share knowledge about video production in here

website www.videomaker79.com

#1028 – Thermaltake V9 Black Edition Case Video Review